pcb relay g5sb 1 pcb relay g5sb compact single-pole relay for switching up to 5 a (normally open contact), ideal for fan control of air conditioners, and heating control of small appliances. ? environment-friendly , pb-free/cd-free. compact spdt relay with high insulation between coil and contacts. up to 5 a switching on the n.o. contacts. ensures an impulse withstand voltage of 8,000 v between the coil and contacts. conforms to ul and csa (vde approval pending). ordering information note: when ordering, add the rated coil voltage to the model number. model number legend 1. number of poles 1: spdt 2. protective structure 4: fully sealed 3. rated coil voltage 5, 9, 12, 24 vdc classification contact form pr otective structure model standard spdt fully sealed g5sb-14 example: g5sb-14 dc12 rated coil voltage g5sb- @@- dc @ 1 2 3
2 pcb relay g5sb specifications coil ratings contact ratings note: p level: 60=0.1 x 10 ?6 operation (with an operating frequency of 120 operations/min.) characteristics note: 1. the data shown above are initial values. 2. the contact resistance is possi ble with 1 a applied at 5 vdc using a fall-of-potential method. 3. the operating time is possible with the operating voltage impo sed with no contact bounce at an ambient temperature of 23 c. 4. the insulation resistance is possible between coil and contacts and between contacts of the same polarity at 500 vdc. 5. the electrical life data items shown are possible at 23 c. rated voltage 5 vdc 9 vdc 12 vdc 24 vdc rated current 80 ma 44.4 ma 33.3 ma 16.7 ma coil resistance 63 ? 202 ? 360 ? 1,440 ? must operate voltage 75% max. of rated voltage must release voltage 5% min. of rated voltage maximum voltage 110% of rated voltage power consumption approx. 400 mw load resistive load rated load 3 a (no)/3 a (nc) at 125 vac 5 a (no)/3 a (nc) at 125 vac 5 a (no) at 250 vac 3 a (nc) at 250 vac 5 a (no)/3 a (nc) at 30 vdc contact material ag alloy rated carry current 5 a (no)/3 a (nc) max. switching voltage 250 vac, 30 vdc max. switching current 5 a (no)/3 a (nc) max. switching capacity 1,250 va, 150 w (no) 750 va, 30 w (nc) min. permissible load 10 ma at 5 vdc contact resistance (see note 2.) 100 m ? max. initial operate time (see note 3.) 10 ms max. release time (see note 3.) 5 ms max. insulation resistance (see note 4.) 1,000 m ? min. dielectric strength 4,000 vac, 50/60 hz for 1 min between coil and contacts 1,000 vac, 50/60 hz for 1 min between contacts of same polarity impulse withstand voltage 8 kv (1.2 x 50 s) vibration resistance destruction: 10 to 55 hz, 0.75-mm single amplitude (1.5-mm double amplitude) malfunction: 10 to 55 hz, 0.75-mm single amplitude (1.5-mm double amplitude) shock resistance destruction: 1,000 m/s 2 (approx. 100g) malfunction: energized: 100 m/s 2 (approximately 10g) non-energized: 100 m/s 2 (approximately 10g) life expectancy (see note 5.) mechanical: 5,000,000 operations (18,000 operations per hour) electrical: 200,000 operations: 3 a (no) /3 a (nc) at 125 vac resistive load 50,000 operations: 5 a (no)/3 a (nc) at 125 vac resistive load 50,000 operations: 5 a (no) at 250 vac resistive load 10,000 operations: 3 a (nc) at 250 vac resistive load 10,000 operations: 5 a (no)/3 a (nc) at 30 vdc resistive load switching frequency: 1,800 operations per hour ambient temperature operating: ?40 c to 70 c with no icing or condensation ambient humidity operating: 5% to 95% weight approx. 6.5 g
pcb relay g5sb 3 approved standards ul508 (file no. e41515) csa c22.2 (no. 14) (file no. lr31928) note: electrical durability tests are performed at 70 c. engineering data dimensions unit: mm model coil ratings contact ratings number of test operations g5sb 5 to 24 vdc 3 a, 125 vac (resistive) nc only 2 a, 125 vac (resistive) nc only 5 a, 250 vac (resistive) no only 3 a, 250 vac (resistive) no only 5 a, 30 vdc (resistive) no only 6,000 7 6 5 4 3 2 1 0 1 10 30 100 250 1,000 max. switching capacity switching current (a) maximu m voltage (%) switching voltage (v) ambient temperature ( c) dc resistive (no) ac resistive (no) 200 180 160 140 120 100 80 60 40 20 0 ? 40 ? 20 02340 60 70 80 100 110 ambient temperature vs. maximum voltage ac resistive (nc) dc resistive (nc) pcb mounting holes (bottom view) tolerance: 0.1 mm terminal arrangement / internal connections (bottom view) (no coil polarity) note: values in parentheses are average values. five, 1.3 0.1-dia. holes 1 23 4 5 (1.18) 10.16 5.08 2.54 (1.19) 7.62 2.54 2.54 20.3 max. (20.0) (see note.) 10.3 max. (10.0) (see note.) 15.8 max. (15.5) (see note.) 0.4 3.4 1 0.27 0.4 10.16 5.08 7.62 2.54
4 pcb relay g5sb certain terms and conditions of sale 1. offer; acceptance. these terms and conditions (these "terms ") are deemed part of all catalogs, manuals or other doc uments, whether electronic or in writ- ing, relating to the sale of goods or services (collectively, the "goods ") by omron electronics llc and its subsidiary companies ("seller "). seller hereby objects to any terms or conditions proposed in buyer's purchase order or other documents which are inconsistent with, or in addition to, these terms. please contact your omron representative to confirm any additional terms for sales from your omron company. 2. prices. all prices stated are current, subject to change without notice by seller. buyer agrees to pay the price in effect at time of shipment. 3. discounts. cash discounts, if any, will apply only on the net amount of invoices sent to buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to seller's payment terms and (ii) buyer has no past due amounts owing to seller. 4. orders. seller will accept no order less than $200 net billing. 5. governmental approvals. buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the impor- tation or sale of the goods. 6. taxes. all taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on seller or required to be collected directly or indirectly by seller for the manufacture, production, sale, delivery, importation, consumption or use of the goods so ld hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by buyer to seller. 7. financial. if the financial position of buyer at any time becomes unsatisfactory to seller, seller reserves the right to stop shipments or require satisfactory security or payment in advance. if buyer fails to make payment or otherwise comply with these terms or any related agreement, seller may (without liability and in addition to other remedies) cancel any unshipped portion of goods sold hereunder and stop any goods in transit until buyer pays all amounts, includ- ing amounts payable hereunder, whether or not then due, which are owing to it by buyer. buyer shall in any event remain liable for all unpaid accounts. 8. cancellation; etc. orders are not subject to rescheduling or cancellation unless buyer indemnifies seller fully against all costs or expenses arising in connection therewith. 9. force majeure. seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. shipping; delivery. unless otherwise expressly agreed in writing by seller: a. shipments shall be by a carrier selected by seller; b. such carrier shall act as the agent of buyer and delivery to such carrier shall constitute delivery to buyer; c. all sales and shipments of goods shall be fob shipping point (unless oth- erwise stated in writing by seller), at which point title to and all risk of loss of the goods shall pass from seller to buye r, provided that seller shall retain a security interest in the goods until the full purchase price is paid by buyer; d. delivery and shipping dates are estimates only. e. seller will package goods as it deem s proper for protection against normal handling and extra charges appl y to special conditions. 11. claims. any claim by buyer against seller for shortage or damage to the goods occurring before delivery to the carrier must be presented in writing to seller within 30 days of receipt of shipment and include the original transporta- tion bill signed by the carrier noting that the carrier received the goods from seller in the condition claimed. 12. warranties. (a) exclusive warranty. seller's exclusive warranty is that the goods will be free from defects in ma terials and workmanship for a period of twelve months from the date of sale by seller (or such other period expressed in writing by seller). seller disclaim s all other warranties, express or implied. (b) limitations. seller makes no warranty or representation, express or implied, about non-infringement, merchantabil- ity or fitness for a particular purpose of the goods. buyer acknowledges that it alone has determined that the goods will suitably meet the requirements of their intended use. seller further discla ims all warranties and responsibility of any type for claims or expenses bas ed on infringement by the goods or other- wise of any intellectual property right. (c) buyer remedy. seller's sole obliga- tion hereunder shall be to replace (in the form originally shipped with buyer responsible for labor charges for re moval or replacement thereof) the non- complying good or, at seller's election, to repay or credit buyer an amount equal to the purchase price of the good; provided that in no event shall seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the goods unless seller's anal ysis confirms that the goods were properly handled, stored, installed and ma intained and not subject to contami- nation, abuse, misuse or inappropriate modification. return of any goods by buyer must be approved in writing by seller before shipment. seller shall not be liable for the suitability or unsuitability or the results from the use of goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. damage limits; etc. seller shall not be liable for special, indi- rect or consequential damage s, loss of profits or produc- tion or commercial loss in any way connected with the goods, whether such claim is based in contract, warranty, negligence or strict liability. further, in no event shall liability of seller exceed the individual price of the good on which liability is asserted. 14. indemnities. buyer shall indemnify and hold harmless seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, inves- tigation, litigation or proceeding (whether or not seller is a party) which arises or is alleged to arise from buyer's acts or omissions under these terms or in any way with respect to the goods. without limiting the foregoing, buyer (at its own expense) shall indemnify and hold harmless seller and defend or settle any action brought against seller to the ex tent that it is based on a claim that any good made to buyer specifications in fringed intellectual property rights of another party. 15. property; confidentiality. the intellectual property embodied in the goods is the exclusive property of seller and its affiliates and buyer shall not attempt to duplicate it in any way without the written permission of seller. notwithstand- ing any charges to buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of seller. all information and materials supplied by seller to buyer relating to the goods are confidential and propri- etary, and buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. miscellaneous. (a) waiver. no failure or delay by seller in exercising any right and no course of dealing between buyer and seller shall operate as a waiver of rights by seller. (b) assignment. buyer may not assign its rights hereunder without seller's written consent. (c) amendment. these terms constitute the entire agreement between buyer and seller relating to the goods, and no pro- vision may be changed or waived unless in writing signed by the parties. (d) severability. if any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) setoff. buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) as used herein, "including " means "including without limitation". certain precautions on specifications and use 1 . suitability of use. seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the combination of the good in the buyer's application or use of the good. at buyer's request, se ller will provide applicable third party certification docum ents identifying ratings and limitations of use which apply to the good. this information by itself is not sufficient for a complete determination of the suitability of the good in combination with the end product, machine, system, or other application or use. the following are some examples of applications for which particular attention must be given. this is not intended to be an exhaustive li st of all possible uses of this good, nor is it intended to imply that the uses listed may be suitable for this good: (i) outdoor use, uses involving potentia l chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) energy control systems, combusti on systems, railroad systems, aviation systems, medical equipment, amusem ent machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) systems, machines and equipment that could present a risk to life or property. please know and observe all prohibitions of use applicable to this good. never use the product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the seller's product is properly rated and installed for the intended use within the overall equipment or system. 2. programmable products. seller shall not be responsible for the user's pro- gramming of a programmable g ood, or any consequence thereof. 3. performance data. performance data given in this catalog is provided as a guide for the user in determining suitabi lity and does not constitute a warranty. it may represent the result of seller's test conditions, and the user must corre- late it to actual application requirements. actual performance is subject to the seller's warranty and limitations of liability. 4. change in specifications. product specifications and accessories may be changed at any time based on improvement s and other reasons. it is our prac- tice to change part numbers when published ratings or features are changed, or when significant construction changes are made. however, some specifica- tions of the good may be changed without any notice. when in doubt, special part numbers may be assigned to fix or es tablish key specifications for your application. please consult with your se ller's representative at any time to con- firm actual specificat ions of purchased good. 5. errors and omissions. the information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions.
pcb relay g5sb 5 omron on-line global - http://www.omron.com usa - http://www.omron.com/oei canada - http://www.omron.ca cat. no. k122-e3-01 printed in usa omron canada, inc. 885 milner avenue toronto, ontario m1b 5v8 416-286-6465 omron electronics llc 55 east commerce drive, suite b schaumburg, il 60173-5302 847-882-2288 12/03 specificat ions subject to change without notice complete ?terms and conditions of sale? for product purchase and use are on omron?s website at www.omron.com/oei ? under the ?about us? tab, in the legal matters section. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.0393 7. to convert grams into ounces, multiply by 0.03527.
|
